Seattle, Washington

360-863-2252

Industrial Dry – Heat Ovens & Materials Testing: Vacuum Ovens

Vacucell – Vacuum Oven

  • Direct heat convection, with patented Servotherm system

  • AISI 304 stainless steel chamber, 316 option

  • 5°C above ambient to 200°C

  • Fuzzy logic enabled controller microprocessor

  • Visual and acoustic alarms

  • Delayed heating, ramps and cycles

  • PT 100 sensor

  • Digital safety thermostat

  • Inert gas connection

  • Needle valve for fine dosing

  • Stainless steel port 40mm

  • Two (2) Aluminum shelves included, optional stainless steel

  • Unit will not heat until oxygen is evacuated

Chamber Volumes
22 – .8 ft3
55 – 2 ft3
111 – 4 ft3

Chemistry

Drying-off solvents from granules, compounds and powders

Aerospace industry
Fine drying of precise components after washing, before assembly in clean rooms, drying of rocket fuel components

Vacucell 111

Vacucell EVO – Vacuum Oven

  • Direct heat chamber, with patented Servotherm system

  • 5°C above ambient to 250°C.

  • Option to 300°C

  • AISI 316 stainless steel chamber

  • 5.7” LCD, icon driven, touch screen controller

  • 100 programs and 100 segments

  • Automatic digital vacuum control 10 – 1100mbr

  • Visual and acoustic alarms

  • 3 wire PT 100 JUMO sensors, self diagnostic

  • Digital safety thermostat

  • Inert gas connection

  • Needle valve for fine dosing

  • Stainless steel port 40mm

  • Aluminum shelves, optional stainless steel

  • Unit will not heat until oxygen is evacuated

Patented Bi-Directional Air Movement System

Chamber Volumes
22 – .8 ft3
55 – 2 ft3
111 – 4 ft3

Petrochemical

Separation of hydrocarbons, drying of temperature –  sensitive resins and solvents under lower temperatures in vacuum

Electronics

Low temperature drying of electronic boards at 80°C

Plastic Processing

PET analyses, nano-compounds

Vacucell EVO 55, 111 and 22 stacked with vacustation cabinet which contains pump

Industrial & Materials Testing Ovens: Dry – Heat Ovens: Natural / Gravity Convection

Ecocell Performance Features

  • When your research requires soft air movement, no vibration and no noise the Ecocell is the dry-heat oven of choice

  • Natural, gentle gravity air convection

  • 5°C above ambient to 250°C.

  • Optional high temperature to 300°C

  • 304 AISI Stainless steel chamber

  • Unique double wall chamber: Main chamber is seamless with rounded corners. 

  • The Inner chamber is removable, without tools for cleaning and sterilization

Chamber Volumes
22 – .8 ft3
55 – 2 ft3
111 – 4 ft3

222 - 8 ft3

404 - 14.3 ft3

707 - 25 ft3

Patented Bi-Directional Air Movement System

Research & Laboratory

Sterilization  and drying of glassware, devices & media.

Energy & Chemical Industries

Drying of compounds, components & media

Industrial & Aerospace

Testing of materials durability, components, ageing tests, cables, wiring, seals, etc. under extended heating conditions

Geology, Earth and Space Science

Drying of soils

Construction & Transport

Materials testing for quality and durability in the construction industry – cement, paints, asphalt, construction plastics, adhesives, roofing products etc.

Hospital, Animal Science, Veterinary

Blanket warming

Ecocell 222 With optional cart 

Durocell With Protective EPOLON Coating

  • Special EPOLON coated chamber and shelves.

  • Epolon protects against caustic, acidic, aggressive media and solvents that would otherwise damage the chamber

  • 5°C above ambient to 125°C temperature range

  • Gentle natural, gravity convection, no vibration or noise

  • 304 AISI Stainless steel chamber, EPOLON coating

  • Unique Double Wall Chamber: Main seamless with rounded corners and inner chamber is removable without tools for cleaning and sterilization

  • Shelf brackets are molded  into the inner chamber walls

Chamber Volumes
22 – .8 ft3
55 – 2 ft3
111 – 4 ft3

222 - 8 ft3

Geology, Earth and Space Science

Drying of soils

Energy & Chemical Industries

Drying of compounds, components & media

Industrial & Aerospace

Testing of materials durability, components, ageing tests, cables, wiring, seals, etc. under extended heating conditions

Construction & Transport

Materials testing for quality and durability in the construction industry – cement, paints, asphalt, construction plastics, adhesives, roofing products etc.

Animal Science

Testing of caustic, corrosive an acidic media

Durocell 55 (2 ft3)

Industrial Dry – Heat Ovens & Materials Testing Ovens: Forced Air / Mechanical Convection

Venticell – Patented Air Movement

  • Precise uniformity is achieved via the patented   forced air system moving air vertically & both directions horizontally.

  • The system surrounds media in a uniform manner unlike most systems that move air from one or two directions

  • Air is exchanged in the chamber an industry leading 48x per hour

  • Temperature range is 10°C above ambient to 250°C.

  • High temperature to 300°C is an available option

  • 304 AISI Stainless steel chamber

  • Unique double wall chamber

  • Main chamber is seamless with rounded corners and the inner chamber is removable without tools for cleaning and sterilization

  • Shelf brackets are molded  into the inner chamber side walls

Chamber Volumes
22 – .8 ft3
55 – 2 ft3
111 – 4 ft3

222 - 8 ft3

Research & Laboratory & Compounding Pharmacy

Sterilization of glassware, devices & media. Installation in clean rooms. High heat sterilization of glassware to industry standards

Energy & Chemical Industries

Drying of compounds, components, plastics & adhesives

Industrial & Aerospace

Testing of materials durability, components, ageing tests, cables, wiring, seals, etc. under extended heating conditions

Construction & Transportation

Materials testing for quality and durability in the construction industry – cement, paints, asphalt, construction plastics, adhesives, roofing products etc.

Venticell 55 (2 ft3) With optional cart